With No-Rope system you simplify difficult maneuvers, safe mooring maneuvers with your yacht.
The No-Rope system is a springloaded winder for your mooring lines.
Your mooring lines are ready for use at all times.
In particulat challanging maneuvers are made considerably easier. After use, the mooring lines will be stowed away in seconds - without any tangels or knots.
High quality materials and an innovative cap make the system water-protected onshore and offshore. Upon request, we can personalize your cap with your own design.
Leave your yacht carefree after every trip, thanks to the guard function. The cleat knot is kept constantly under tension by the No-Rope system.
Works great, thank you very much.
Motorbootyacht
The no-rope system is suitable for almost every type of boat; regardless of whether it is a sailing or motor yacht. For proper operation, the mooring line should be able to enter the winder in a straight line (horizontally and vertically).
Depending on the size of your boat 2 to 4 set are required.
The cap is approximately 110mm x 38mm, the retaining ring is approximately 40mm x 9mm, the winder is 400mm x 210mm x 352mm. If possible, the system should be installed in a drained compartment.
Installation is easy. Detailed installation instructions and user manual are included. If you are interested, we will be happy to send those to whom enquired online.
No-Rope system with the necessery accessories currently costs US$ 1099 per unit (excluding tax and shipping cost). Please keep in mind that the no-rope system is currently only available in limited quantities.
Leave your yacht carefree after every trip. Safety while you are away is priceless. The yacht is secured with a mooring knot on the mooring cleat. The spring tension of the no-rope system keeps the knot continuously under tension.
The No-Rope system can only be ordered via our website. Due to delivery bottlenecks, please use the enquiry form if you are interested.
Currently only 14mm thickness is available. If you need stronger ropes, please contact us. We will forward your request to our development team.
The inlay of the cap can be provided with your own design (e.g. logo or the boat name) at an additional charge. We just need you to send us your design template.